ONEAC(8)
========

NAME
----

oneac - Driver for Oneac UPS equipment

NOTE
----

This man page only documents the hardware-specific features of the
oneac driver.  For information about the core driver, see
linkman:nutupsdrv[8].

SUPPORTED HARDWARE
------------------
This driver supports Oneac EG and ON UPS equipment with the
Advanced Interface. If your UPS is equipped with the Basic
Interface card, use the genericups driver.

EXTRA ARGUMENTS
---------------
This driver supports the following optional settings in the
linkman:ups.conf[5] file:

*testtime*='num'::
Change battery test time from the 2 minute default.

INSTANT COMMANDS
----------------
This driver supports the following Instant Commands.

*reset.input.minmax*::
Reset the minimum and maximum input line voltage values
seen since the last reset or power on.

*test.battery.start*::
Start a battery test.  The default time is 2 minutes.  This
time can be set in the *ups.conf* file.  See *testime* above.

*test.battery.stop*::
Stops a battery test that is in progress.

*test.failure.start*::
Starts a 15 second long simulation of an input power
failure.

AUTHOR
------
Eric Lawson <elawson@inficad.com>

SEE ALSO
--------

The core driver:
~~~~~~~~~~~~~~~~
linkman:nutupsdrv[8]

Internet resources:
~~~~~~~~~~~~~~~~~~~
The NUT (Network UPS Tools) home page: http://www.networkupstools.org/
